Command Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches
Examples
# Set the additional metric to 12 for routes advertised by VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ripng metricout 12
2.1.17 ripng poison-reverse
Syntax
ripng poison-reverse
undo ripng poison-reverse
View
Interface view
Parameters
None
Description
Use the rip poison-reverse command to enable the poison reverse function.
Use the undo rip poison-reverse command to disable the poison reverse function.
By default, the poison reverse function is disabled.
Examples
Enable the poison reverse function for RIPng update messages on VLAN-interface
100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ripng poison-reverse
2.1.18 ripng split-horizon
Syntax
ripng split-horizon
undo ripng split-horizon
View
Interface view
Chapter 2 IPv6 RIPng Configuration
2-15
Commands