Display Ripng Database - H3C S7500E Series Command Manual

Command Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches

2.1.4 display ripng database

Syntax
display ripng process-id database
View
Any view
Parameters
process-id: RIPng process ID, in the range of 1 to 65535.
Description
Use the display ripng database command to display all active routes in the RIPng
advertising database, which are sent in normal RIPng update messages.
Examples
# Display the active routes in the database of RIPng process 100.
<Sysname> display ripng 100 database
2001:7B::2:2A1:5DE/64,
1:13::/120,
1:32::/120,
1:33::/120,
100::/32,
via FE80::200:5EFF:FE04:3302, cost 2
3FFE:C00:C18:1::/64,
via FE80::200:5EFF:FE04:B602, cost 2
3FFE:C00:C18:1::/64,
via FE80::200:5EFF:FE04:B601, cost 2
3FFE:C00:C18:2::/64,
via FE80::200:5EFF:FE04:B602, cost 2
3FFE:C00:C18:3::/64,
via FE80::200:5EFF:FE04:B601, cost 2
4000:1::/64,
via FE80::200:5EFF:FE04:3302, cost 2
4000:2::/64,
via FE80::200:5EFF:FE04:3302, cost 2
cost 4, Imported
cost 4, Imported
cost 4, Imported
cost 4, Imported
Chapter 2 IPv6 RIPng Configuration
2-4
Commands