Restoring To Factory Default Configuration - H3C SR6604 Installation Manual

|<9> Storage Device Operation
|<0> Reboot
============================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Enter your choice(0-9): 8
The router deletes the console login password configuration commands from the main
next-startup configuration file. After the operation is completed, the following message appears:
Clear Image Password Success!
When the EXTEND-BOOTWARE menu appears again, enter 0 to reboot the router.
2.
Configure a new console login password (see
3.
To make the setting take effect after a reboot, save the running configuration to the next-startup
4.
configuration file.
[sysname] save

Restoring to factory default configuration

Reboot the router to access the EXTEND-BOOTWARE menu, and enter 5.
1.
The current mode is no password recovery.
Note: The current operating device is cfa0
Enter < Storage Device Operation > to select device.
==========================<EXTENDED-BOOTWARE MENU>==========================
|<1> Boot System
|<2> Enter Serial SubMenu
|<3> Enter Ethernet SubMenu
|<4> File Control
|<5> Restore to Factory Default Configuration
|<6> Skip Current System Configuration
|<7> BootWare Operation Menu
|<8> Skip Authentication for Console Login
|<9> Storage Device Operation
|<0> Reboot
============================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Enter your choice(0-9): 5
At the prompt for confirmation, enter Y.
2.
The router deletes its main and backup next-startup configuration files and restores the
factory-default configuration.
The current mode is no password recovery. The configuration files will be
deleted, and the system will start up with factory defaults, Are you sure to
continue?[Y/N]Y
Setting...Done.
When the EXTEND-BOOTWARE menu appears again, enter 0 to reboot the router.
3.
The router starts up with the factory-default configuration.
"Configure a new console login
87
|
|
password.").
|
|
|
|
|
|
|
|
|
|