H3C MSR 20-20 Command Reference Manual page 644
Msr 20/30/50 series routers
Hide thumbs
Also See for MSR 20-20:
- Installation manual (73 pages) ,
- User manual (60 pages) ,
- Supplementary manual (6 pages)
Table of Contents
Advertisement
644
C
40: P
-B
VLAN C
C
HAPTER
ORT
ASED
ONFIGURATION
OMMANDS
Refer to "Link Aggregation Configuration Commands" on page 473 for
information about port groups.
You must configure the same default VLAN ID for the Trunk port of both the local
device and remote device. Otherwise, the packets cannot be transmitted correctly.
Related command:
port link-type.
Example
# Configure the default VLAN ID for the Trunk port Ethernet 1/0 as 100.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] port link-type trunk
[Sysname-Ethernet1/0] port trunk pvid vlan 100
Advertisement
Chapters
Table of Contents
