648
C
41: V
HAPTER
OICE
Related command:
Example
voice vlan enable
Syntax
View
Parameter
Description
Example
voice vlan mac-address
Syntax
View
Parameter
VLAN C
C
ONFIGURATION
OMMANDS
display voice vlan state.
# Configure the aging time of the voice VLAN as 100 minutes.
<Sysname> system-view
[Sysname] voice vlan aging 100
voice vlan enable
undo voice vlan enable
Ethernet interface view
None
Use the
voice vlan enable
Ethernet port.
Use the
undo voice vlan enable
on an Ethernet port.
No voice VLAN is enabled on a port by default.
Under automatic mode, only The Trunk or Hybrid port can be configured with
■
the voice VLAN feature. The Access port cannot be configured with this
feature.
Before enabling the voice VLAN feature on a port, ensure that its is enabled
■
globally first
Only after the voice VLAN feature is enabled under both system view and
■
Ethernet interface view will it functions properly.
# Enable the voice VLAN attribute on the port Ethernet 1/0.
<Sysname> system-view
[Sysname] voice vlan 2 enable
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] voice vlan enable
voice vlan mac-address mac-addr mask oui-mask [ description text ]
undo voice vlan mac-address oui
System view
mac-addr: MAC address, in the format of H-H-H, such as 1234-1234-1234.
command to enable the voice VLAN feature on an
command to disable the voice VLAN feature