Power Control Operations; Turning On The Outlet(S) - LEGRAND Raritan PX3TS User Manual

Chapter 9: Using the Command Line Interface

Power Control Operations

698
This section applies to outlet-switching capable models only.
Outlets on the PX3TS can be turned on or off, or power cycled through the CLI.
Besides, you can cancel the power-on process while the PX3TS is powering on
ALL outlets.
You must perform this operation in the administrator mode. See
Modes and Prompts (on page 527).

Turning On the Outlet(s)

This section applies to outlet-switching capable models only.
This command turns on one or multiple outlets.
# power outlets <numbers> on
To quicken the operation, you can add the parameter "/y" to the end of the
command, which confirms the operation.
# power outlets <numbers> on /y
Variables:
•
<numbers> is one of the options: all, an outlet number, a list or a range of
outlets.
Option Description
all Switches ON all outlets.
A specific outlet Switches ON the specified outlet.
number
A comma- Switches ON multiple, inconsecutive or consecutive
separated list of outlets.
outlets
For example, to specify 7 outlets -- 2, 4, 9, 11, 12, 13
and 15, type:
outlets 2,4,9,11-13,15.
A range of Switches ON multiple, consecutive outlets.
outlets with a
For example, to specify 6 consecutive outlets -- 3, 4, 5,
hyphen in
6, 7, 8, type:
between
outlets 3-8.
Different CLI