Ad-Related Configuration - LEGRAND Raritan PX3TS User Manual

Appendix I: RADIUS Configuration Illustration
VENDOR Raritan 13742
BEGIN-VENDOR Raritan
ATTRIBUTE Raritan-User-Roles 26 string
END-VENDOR Raritan
steve Cleartext-Password := "test123"
Raritan-PDU-User-Roles = "Raritan:G{Admin User SystemTester}"

AD-Related Configuration

824
Step B -- create a user profile for "steve" in FreeRADIUS:
Go to this location: /etc/raddb/users.
1.
2. Add the data of the user "steve" by typing the following. Note that the
values after the equal sign (=) must be enclosed in double quotes (").
When RADIUS authentication is intended, make sure you also configure the
following settings related to Microsoft Active Directory (AD):
•
Register the NPS server in AD
•
Configure remote access permission for users in AD
The NPS server is registered in AD only when NPS is configured for the FIRST
time and user accounts are created in AD.
If CHAP authentication is used, you must enable the following feature for user
accounts created in AD:
•
Store password using reversible encryption
Important: Reset the user password if the password is set before you enable
the "Store password using reversible encryption" feature.
To register NPS:
1. Open the NPS console.