Inlet Sensor Threshold Information
This command syntax shows the specified inlet sensor's threshold-related
information.
#
show sensor inlet <n> <sensor type>
To show detailed information, add the parameter "details" to the end of the
command.
#
show sensor inlet <n> <sensor type> details
Variables:
•
<n> is the number of the inlet whose sensors you want to query. For a
single-inlet PDU, <n> is always 1.
•
<sensor type> is one of the following sensor types:
Sensor type
current
voltage
activePower
apparentPower
powerFactor
activeEnergy
unbalancedCurrent
lineFrequency
Displayed information:
•
Without the parameter "details," only the reading, state, threshold,
deassertion hysteresis and assertion timeout settings of the specified inlet
sensor are displayed.
•
With the parameter "details," more sensor information is displayed,
including resolution and range.
•
If the requested sensor type is not supported, the "Sensor is not available"
message is displayed.
Chapter 9: Using the Command Line Interface
Description
Current sensor
Voltage sensor
Active power sensor
Apparent power sensor
Power factor sensor
Active energy sensor
Unbalanced load sensor
Line frequency sensor
545