4.
In the Script field, select the script that you want it to be started or
stopped when an event occurs.
▪
No script is available if you have not created or loaded it into the
PX3TS.
5.
To apply different arguments than the default, do the following. Note that
the newly-added arguments will override this script's default arguments.
a.
Click
b. Type the key and value.
c.
Repeat the same steps to enter more arguments as needed.
▪ To remove any existing argument, click
Switch LHX/SHX
This section applies to PX3 only.
If Schroff LHX/SHX Support is enabled, the LHX/SHX-related actions will be
available. See
Miscellaneous
Use this action to switch the LHX/SHX on or off when, for example,
temperature thresholds are reached.
Operation:
1.
Choose Device Settings > Event Rules >
2.
Select 'Switch LHX/SHX' from the Action list.
3.
In the Operation field, select 'Turn LHX/SHX on' or 'Turn LHX/SHX off.'
4.
In the Available LHX/SHX field, select the LHX/SHX device to be turned on
or off. To select all available LHX/SHX devices, click Select All.
To remove any LHX/SHX device from the Selected LHX/SHX field, click that
device's
. To remove all devices, click Deselect All.
Switch Outlet Group
The "Switch outlet group" action is available only when your PX3TS is
outlet-switching capable. This action turns on, off or power cycles a specific
outlet group.
Operation:
1.
Choose Device Settings > Event Rules >
2.
Select 'Switch outlet group' from the Action list.
Chapter 7: Using the Web Interface
.
(on page 462).
adjacent to it.
.
.
413