LEGRAND Raritan PX3TS User Manual page 735

Scenario 1: Use the default SCP port and default filename
▪ SSH/SCP port is the default (22), and the accessed PX3TS is a standalone device.
▪ The diagnostic file's default filename "diag-data.zip" is wanted. Then add a dot (.) in the end
of the SCP command as shown below.
scp <user name>@<device ip>:/diag-data.zip .
Scenario 2: Specify a different SCP port but use the default filename
▪ SSH/SCP port is NOT the default (22), or the accessed PX3TS is a Port-Forwarding slave
device.
▪ The diagnostic file's default filename "diag-data.zip" is wanted. Then add a dot in the end of
the SCP command as shown below.
scp -P <port> <user name>@<device ip>:/diag-data.zip .
Scenario 3: Specify a new filename but use the default SCP port
▪ SSH/SCP port is the default (22), and the accessed PX3TS is a standalone device.
▪ Renaming the diagnostic file is wanted.
scp <user name>@<device ip>:/diag-data.zip <filename>
Scenario 4: Specify a different SCP port and a new filename
▪ SSH/SCP port is NOT the default (22), or the accessed PX3TS is a Port-Forwarding slave
device.
▪ Renaming the diagnostic file is wanted.
scp -P <port> <user name>@<device ip>:/diag-data.zip <filename>
▪
<user name> is the "admin" or any user profile with Administrator
Privileges or "Unrestricted View Privileges" privileges.
▪
<device ip> is the IP address or hostname of the PX3TS whose data you
want to download.
▪
<port> is the current SSH/SCP port number, or the port number of a
specific slave device in the Port-Forwarding chain.
▪
<filename> is the new filename of the downloaded file.
2. Type the password when prompted.
3. The system downloads the specified data from the PX3TS onto your
computer.
▪
If you do NOT specify a new filename in the command, such as
Scenarios 1 or 2, the downloaded file's default name is "diag-data.zip."
Chapter 10: Using SCP Commands
715