Appendix I: RADIUS Configuration Illustration
812
Step A: Add Your PX3TS as a RADIUS Client
The RADIUS implementation on the PX3TS follows the standard RADIUS
Internet Engineering Task Force (IETF) specification so you must select "RADIUS
Standard" as its vendor name when configuring the NPS server.
Presumptions in the illustration:
•
IP address of your PX3TS = 192.168.56.29
•
RADIUS authentication port specified for PX3TS: 1812
•
RADIUS accounting port specified for PX3TS: 1813
To add your PX3TS to the RADIUS NPS:
1.
Choose Start > Administrative Tools > Network Policy Server. The Network
Policy Server console window opens.