LEGRAND Raritan PX3TS User Manual page 79

•
An RJ-12 to RJ-45 adapter is recommended to connect a DPX or DPX2
sensor package to DPX3-ENVHUB4.
•
In the following diagrams, the sensor package in "green" can be replaced
by a DPX2 sensor package. The sensor package in "blue" can be one DPX2,
DPX3, DX or DX2 sensor package.
This section only illustrations the following three combinations, but actually
there are tens of different combinations by using the DPX3-ENVHUB4 sensor
hub.
Chapter 4: Connecting External Equipment (Optional)
59