LEGRAND Raritan PX3TS User Manual page 618

Chapter 9: Using the Command Line Interface
598
Option Description
false The Telnet service is disabled.
Changing the Telnet Port
This command changes the Telnet port.
config:# network services telnet port <n>
Variables:
•
<n> is a TCP port number between 1 and 65535. The default Telnet port is
23.
Changing the SSH Configuration
You can enable or disable the SSH service, or change its TCP port using the CLI
commands.
An SSH command begins with network services ssh.
Enabling or Disabling SSH
This command enables or disables the SSH service.
config:# network services ssh enabled <option>
Variables:
•
<option> is one of the options: true or false.
Option Description
true The SSH service is enabled.
false The SSH service is disabled.
Changing the SSH Port
This command changes the SSH port.
config:# network services ssh port <n>
Variables:
•
<n> is a TCP port number between 1 and 65535. The default SSH port is 22.