LEGRAND Raritan PX3TS User Manual page 594

Chapter 9: Using the Command Line Interface
574
Enabling or Disabling Data Logging
This command enables or disables the data logging feature.
config:# pdu dataRetrieval <option>
Variables:
•
<option> is one of the options: enable or disable.
Option Description
enable Enables the data logging feature.
disable Disables the data logging feature.
For more information, see
Setting Data Logging Measurements Per Entry
This command defines the number of measurements accumulated per log
entry.
config:# pdu measurementsPerLogEntry <number>
Variables:
•
<number> is an integer between 1 and 600. The default is 60 samples per
log entry.
For more information, see
Setting Data Logging (on page 437).
Setting Data Logging (on page 437).