LEGRAND Raritan PX3TS User Manual page 101

To add a link unit:
Log in to the master PDU as shown displayed above in the PDU page.
Click Add Link PDU. The following add box displays:
1. The Link ID is populated as the next available ID number (2-8), assigned
sequentially as each link unit is added to the chain to identify the link unit
in the user interfaces. Note: From the drop-down, you can manually select
the desired Link ID to order the link units in the chain as desired. Once
associated with a link unit, the Link ID cannot be edited.
2. Provide the IP address of the link unit.
3. Provide the login credentials for the link unit. Note: If the link unit has
factory settings, you will be prompted to set the new password.
4. Click Add.
Chapter 5: PDU Linking
81