LEGRAND Raritan PX3TS User Manual page 416

Chapter 7: Using the Web Interface
396
Action
Request LHX/SHX
maximum cooling
Send email
Send sensor report
Send SMS message
Send snapshots via
email
Send SNMP notification Sends SNMP traps or informs to one or multiple
Start/stop Lua script
Switch LHX/SHX
Switch outlets
Switch outlet group
Switch peripheral
actuator
Syslog message
Function
Applies the maximum cooling to the LHX/SHX
device. See Request LHX/SHX Maximum Cooling
(on page 403).
This option is available only when the Schroff
LHX/SHX support has been enabled.
Emails a textual message. See
404).
Reports the readings or status of the selected
sensors, including internal or external sensors. See
Send Sensor Report (on page 406).
Sends a message to a mobile phone. See
Message (on page 408).
Emails the snapshots captured by a connected
Logitech webcam (if available). See
®
Snapshots via Email (on page 409).
SNMP destinations. See Send an SNMP
Notification (on page 411).
If you are a developer who can create a Lua script,
you can upload it to the PX3TS, and have the PX3TS
automatically perform or stop the script in
response to an event. See
Script (on page 412).
Switches on or off the LHX/SHX device. See
LHX/SHX (on page 413).
This option is available only when the Schroff
LHX/SHX support has been enabled.
Switches on, off or cycles the power to the
specified outlet(s). See Switch Outlets
414).
Switches on, off or cycles the power to all outlets
of the specified outlet group. See
Group (on page 413).
Switches on or off the mechanism or system
connected to the specified actuator. See
Peripheral Actuator (on page 414).
Makes the PX3TS automatically forward event
messages to the specified syslog server. See
Message (on page 415).
Send Email (on page
Send SMS
Send
Start or Stop a Lua
Switch
(on page
Switch Outlet
Switch
Syslog