Command History - LEGRAND Raritan PX3TS User Manual

Chapter 9: Using the Command Line Interface
558
Server Reachability Information for a Specific Server
To show the server reachability information for a certain IT device only, use the
following command.
# show serverReachability server <n>
To show detailed information, add the parameter "details" to the end of the
command.
# show serverReachability server <n> details
Variables:
•
<n> is a number representing the sequence of the IT device in the
monitored server list.
You can find each IT device's sequence number using the CLI command of
show serverReachability as illustrated below.
Displayed information:
•
Without the parameter "details," only the specified device's IP address,
monitoring enabled/disabled state and current status are displayed.
•
With the parameter "details," more settings for the specified device are
displayed, such as number of pings and wait time prior to the next ping.

Command History

This command shows the command history for current connection session.
# show history
Displayed information:
•
A list of commands that were previously entered in the current session is
displayed.