Chapter 2 Rackmount, Inlet And Outlet Connections; Rackmount Safety Guidelines; Mounting A Px3Ts Device - LEGRAND Raritan PX3TS User Manual

Chapter 2

Rackmount Safety Guidelines

Mounting a PX3TS Device

Rackmount, Inlet and Outlet Connections
In This Chapter
Rackmount Safety Guidelines ............................................................................... 9
Mounting a PX3TS Device ..................................................................................... 9
Inlet and Outlet Power Connections .................................................................. 12
In Raritan products which require rack mounting, follow these precautions:
▪
Operation temperature in a closed rack environment may be greater
than room temperature. Do not exceed the rated maximum ambient
temperature of the Power Distribution Units. See
page 721) in the User Guide.
▪
Ensure sufficient airflow through the rack environment.
▪
Mount equipment in the rack carefully to avoid uneven mechanical
loading.
▪
Connect equipment to the supply circuit carefully to avoid overloading
circuits.
▪
Ground all equipment properly, especially supply connections, to the
branch circuit.
Using appropriate brackets and tools, fasten the 1U or 2U PX3TS device to the
rack or cabinet. The way to install a PX3TS device varies according to the device
length.
To mount a PX3TS device which is long:
1. Attach mounting ears and mounting brackets to each side of the PX3TS
with provided screws.
Specifications (on
9