Connecting A Logitech Webcam - LEGRAND Raritan PX3TS User Manual

Chapter 4: Connecting External Equipment (Optional)

Connecting a Logitech Webcam

72
Raritan devices
PX3 PDUs,
PX3TS transfer switches
PMC (BCM2 series)
Note: In case you hot swap or hot plug any AMS-Mx-Z in a chain, causing the
FEATURE port of the PX3TS to malfunction, you can power cycle or reset the
PX3TS to restore the FEATURE port.
Connect webcams to PX3TS in order to view videos or snapshots of the
webcam's surrounding area.
The following USB Video Class (UVC) compliant webcam is supported:
•
Logitech HD pro C920
®
•
Logitech Webcam Pro 9000, Model 960-000048
® ®
Other UVC-compliant webcams may also work. However, Raritan has neither
tested them nor claimed that they will work properly.
Tip: You can easily find a list of UVC-compliant webcams on the Internet.
The PX3TS supports up to two webcams. After connecting a webcam, you can
retrieve visual information from anywhere through the PX3TS web interface.
For more information on the Logitech webcam, refer to the user
documentation accompanying it.
To connect a webcam:
1. Connect the webcam to the USB-A port on the PX3TS. The PX3TS
automatically detects the webcam.
2. Position the webcam properly.
Important: If a USB hub is used to connect the webcam, make sure it is a
"powered" hub.
Snapshots or videos captured by the webcam are immediately displayed in the
PX3TS web interface after the connection is complete. See
Webcams and Viewing Live Images
Maximum strips per chain
(on page 495).
Configuring