Chapter 9: Using the Command Line Interface
552
Existing Roles
This command shows the data of one or all existing roles.
#
show roles <role_name>
Variables:
•
<role_name> is the name of the role whose permissions you want to query.
The variable can be one of the following options:
Option
all
a specific role's name
Displayed information:
•
Role settings are displayed, including the role description and privileges.
Load Shedding Settings
This section applies to outlet-switching capable models only.
This command shows the load shedding settings.
#
show loadshedding
Displayed information:
•
The load shedding state is displayed along with non-critical outlets.
Note: The load shedding mode is associated with critical and non-critical outlets.
To specify critical and non-critical outlets through CLI, see
Non-Critical Outlets
(on page 573).
Serial Port Settings
This command shows the baud rate setting of the serial port labeled CONSOLE
/ MODEM on the PX3TS.
#
show serial
Description
This option shows all existing roles.
Tip: You can also type the command without
adding this option "all" to get the same data.
This option shows the data of the specified
role only.
Specifying