LEGRAND Raritan PX3TS User Manual page 505

Alternatives:
To use a different bulk configuration method, refer to:
•
Bulk Configuration via SCP
•
Bulk Configuration or Firmware Upgrade via DHCP/TFTP
•
Configuration or Firmware Upgrade with a USB Drive
•
Raw Configuration Upload and Download
Tip: Both methods of uploading 'bulk configuration' file or 'raw configuration'
file via SCP can serve the purpose of bulk configuration. The only difference is
that you can configure device-specific settings with the upload of raw
configuration but not with the 'bulk configuration' file.
Modifying or Removing Bulk Profiles
You can modify or remove any bulk profile except for the built-in one.
Note that a profile that has been set as the default cannot be removed, either.
To remove it, you have to remove its default setting first.
Choose Maintenance > Bulk Configuration. A list of profiles displays and then
do one of the following.
To modify an existing profile:
1. Click on the row of the wanted profile in the list.
2. Change the settings you want.
3. Click Save.
To remove a single profile:
1. Click on the row of the wanted profile.
2. Click on the top-right corner.
3. Click Delete on the confirmation message.
To remove one or multiple profiles:
1. Click to make checkboxes appear in front of profiles.
2. Select one or multiple profiles.
Chapter 7: Using the Web Interface
(on page 712)
(on page 769)
(on page 746)
(on page 731)
485