LEGRAND Raritan PX3TS User Manual page 874

Appendix J: Additional PX3TS Information
854
To set or Use this command
enable
network ethernet <ETH>
EAP identity
eapIdentity <identity>
<identity> = your user name for EAP
authentication
network ethernet <ETH>
EAP TLS client
eapClientCertificate
certificate
When prompted to enter the client
certificate, open the certificate with a text
editor, copy and paste the content into
the communications program.
network ethernet <ETH>
EAP TLS client
eapClientPrivateKey
private key
When prompted to enter the private key,
open the key with a text editor, copy and
paste the content into the
communications program.
network ethernet <ETH>
EAP password
eapPassword
When prompted to enter the password
for EAP authentication, type the
password.
network ethernet <ETH>
EAP CA
eapCACertificate
certificate
When prompted to enter the CA
certificate, open the certificate with a text
editor, copy and paste the content into
the communications program.
network ethernet <ETH>
Radius
eapAuthServerName <FQDN>
authentication
server's name
<FQDN> = Fully qualified domain name of
the Radius server name shown in the CA
certificate