LEGRAND Raritan PX3TS User Manual page 707

Naming an Asset Strip
This command syntax names or changes the name of an asset strip connected
to the PX3TS device.
config:# assetStrip <n> name "<name>"
Variables:
•
<n> is the number of the FEATURE port where the selected asset strip is
physically connected. For the PX3TS device with only one FEATURE port,
the number is always 1.
•
<name> is a string comprising up to 64 ASCII printable characters. The
<name> variable must be enclosed in quotes when it contains spaces.
Specifying the Number of Rack Units
This command syntax specifies the total number of rack units on an asset strip
connected to the PX3TS device.
config:# assetStrip <n> numberOfRackUnits <number>
Note: A rack unit refers to a tag port on the asset strips.
Variables:
•
<n> is the number of the FEATURE port where the selected asset strip is
physically connected. For the PX3TS device with only one FEATURE port,
the number is always 1.
•
<number> is the total number of rack units available on the connected
asset strip. This value ranges from 8 to 64.
Chapter 9: Using the Command Line Interface
687