LEGRAND Raritan PX3TS User Manual page 481

Checking Lua Scripts States
Choose Device Settings > Lua Scripts to show the scripts list, which indicates
the current state and settings of each script.
State:
Four script states are available.
State Description
New
The script is never executed since the device boot.
Running
The script is currently being executed.
Terminated
The script was once executed, but stops now.
Restarting
The script will be executed. Only the scripts with the
"Restart" column set to "yes" will show this state.
Autostart:
This column indicates whether the checkbox labeled "Start automatically at
system boot" is enabled. See
Restart:
This column indicates whether the checkbox labeled "Restart after
termination" is enabled. See
Modifying or Deleting a Script
You can edit an existing script's codes or even replace it with a new script. Or
you can simply remove a unnecessary script from the PX3TS.
To modify or replace a script:
1. Choose Device Settings > Lua Scripts.
2. Click the desired one in the scripts list.
3. Click > Edit Script.
Chapter 7: Using the Web Interface
Writing or Loading a Lua Script
Writing or Loading a Lua Script
(on page 457).
(on page 457).
461