Appendix I: RADIUS Configuration Illustration
816
Step B: Configure Connection Policies and Vendor-Specific Attributes
You need to configure the following for connection request policies:
•
IP address or host name of the PX3TS
•
Connection request forwarding method
•
Authentication method(s)
•
Standard RADIUS attributes
Presumptions in the illustration:
•
IP address of your PX3TS = 192.168.56.29
•
Local NPS server is used
•
RADIUS protocol selected on your PX3TS = CHAP
•
Existing roles of your PX3TS = Admin, User and SystemTester
Illustration:
1.
Open the NPS console, and expand the Policies folder.