LEGRAND Raritan PX3TS User Manual page 318

Chapter 7: Using the Web Interface
298
2. Copy and paste all content in the text editor into the SSH Public Key field.
SNMPv3:
The SNMPv3 access permission is disabled by default.
Field/setting Description
Enable SNMPv3
Select this checkbox when intending to permit the
SNMPv3 access by this user.
Note: The SNMPv3 protocol must be enabled for
SNMPv3 access. See
page 340).
Security level Click the field to select a preferred security level from
the list:
▪ None: No authentication and no privacy. This is the
▪ Authentication: Authentication and no privacy.
▪ Authentication & Privacy: Authentication and
•
Authentication Password: This section is configurable only when
'Authentication' or 'Authentication & Privacy' is selected.
Field/setting
Same as user
password
Password,
Confirm password
•
Privacy Password: This section is configurable only when 'Authentication &
Privacy' is selected.
Field/setting
Same as
authentication
password
Configuring SNMP Settings
default.
privacy.
Description
Select this checkbox if the authentication password is
identical to the user's password.
To specify a different authentication password, disable
the checkbox.
Type the authentication password if the 'Same as User
Password' checkbox is deselected.
The password must consist of 8 to 32 ASCII printable
characters.
Description
Select this checkbox if the privacy password is
identical to the authentication password.
To specify a different privacy password, disable the
checkbox.
(on