LEGRAND Raritan PX3TS User Manual page 401

Event/context
Asset Management > State
Asset Management > Rack Unit >
* > Tag Connected
Asset Management > Rack Unit >
* > Blade Extension Connected
Event types Radio buttons
▪ Connected: PX3TS takes the action only when
Device connection or
disconnection, such as
▪ Disconnected: PX3TS takes the action only when
a USB-cascaded slave
device
▪ Both: PX3TS takes the action both when the
+12V Supply1 (or 2) Available radio buttons include "Fault," "OK" and
Status "Both."
▪ Fault: PX3TS takes the action only when the
▪ OK: PX3TS takes the action only when when the
▪ Both: PX3TS takes the action whenever the
Default Log Messages
These default log messages are recorded internally and emailed to specified
recipients when PX3TS events occur (are TRUE) or, in some cases, stop or
become unavailable (are FALSE). See
email messages.
Default message when the event = TRUE
State of asset strip [AMSNUMBER]
('[AMSNAME]') changed to '[AMSSTATE]'.
Asset tag with ID '[AMSTAGID]' connected
at rack unit [AMSRACKUNITPOSITION],
slot [AMSBLADESLOTPOSITION] of asset
strip [AMSNUMBER] ('[AMSNAME]').
Blade extension with ID '[AMSTAGID]'
connected at rack unit
[AMSRACKUNITPOSITION] of asset strip
[AMSNUMBER] ('[AMSNAME]').
Chapter 7: Using the Web Interface
the selected device is physically connected to it.
the selected device is physically disconnected
from it.
selected device is physically connected to it and
when it is disconnected.
selected 12V power supply to the controller
enters the fault state.
selected 12V power supply to the controller
enters the OK state.
selected 12 power supply's status changes.
Send Email (on page 404) to configure
Default message when the event =
FALSE
Asset tag with ID '[AMSTAGID]'
disconnected at rack unit
[AMSRACKUNITPOSITION], slot
[AMSBLADESLOTPOSITION] of asset
strip [AMSNUMBER] ('[AMSNAME]').
Blade extension with ID '[AMSTAGID]'
disconnected at rack unit
[AMSRACKUNITPOSITION] of asset
strip [AMSNUMBER] ('[AMSNAME]').
381