Table of Contents
Advertisement
Chapter 7: Using the Web Interface
404
3.
In the Available LHX/SHX field, select the desired SHX-30 device one by one,
or click Select All.
4.
To remove any SHX-30 device from the Selected LHX/SHX field, click that
device's
or click Deselect All.
Send Email
You can configure emails to be sent when an event occurs and can customize
the message.
Messages consist of a combination of free text and PX3TS placeholders. The
placeholders represent information which is pulled from the PX3TS and
inserted into the message.
For example:
[USERNAME] logged into the device on [TIMESTAMP]
translates to
Mary logged into the device on 2012-January-30 21:00
For a list and definition of available variables, see
Messages
(on page 425).
Operation:
1.
Choose Device Settings > Event Rules >
2.
Select 'Send email' from the Action list.
3.
In the 'Recipient email addresses' field, specify the email address(es) of the
recipient(s). Use a comma to separate multiple email addresses.
4.
By default, the SMTP server specified on the SMTP Server page will be the
SMTP server for performing this action.
To use a different SMTP server, select the 'Use custom settings' radio
button. The fields for customized SMTP settings appear. For information on
each field, see
Configuring SMTP Settings
Default messages are sent based on the event. For a list of default log
messages and events that trigger them, see
page 381).
5.
If needed, you can customize the subject and messages sent via this email.
▪
Select the 'Custom subject' checkbox, and enter the text you prefer as
this email's subject.
▪
Select the 'Use custom log message' checkbox, and then create a
custom message up to 1024 characters in the provided field.
Placeholders for Custom
.
(on page 342).
Default Log Messages
(on
Advertisement
Table of Contents
Troubleshooting
