LEGRAND Raritan PX3TS User Manual page 691

•
<option> is one of the options: enable, disable or a numeric value.
Option Description
enable Enables the specified threshold for a specific inlet
sensor.
disable Disables the specified threshold for a specific inlet
sensor.
A numeric value Sets a value for the specified threshold of a specific
inlet sensor and enables this threshold at the same
time.
•
<hy_value> is a numeric value that is assigned to the hysteresis for the
specified inlet sensor. See
page 839).
•
<as_value> is a numeric value that is assigned to the assertion timeout for
the specified inlet sensor. See
837).
Additional sensors supported by specific models:
Specific PX3TS models support some or all of the following sensors. The CLI
command(s) listed above can be also applied to the following sensors. Note
that the measurement unit of current values in CLI is A, not mA.
Sensor type Description
peakCurrent Peak current sensor
reactivePower Reactive power sensor
displacementPowerFact Displacement power factor sensor
or
residualCurrent RCM current sensor
▪ For Type A, it is the sensor that detects
▪ For Type B, it is the sensor that detects
Chapter 9: Using the Command Line Interface
"To De-assert" and Deassertion Hysteresis
"To Assert" and Assertion Timeout
residual AC current.
both residual AC and DC current.
(on
(on page
Supported on PXC and
Legrand PDU only
▪ three-phase models als
support pole-level peak
current
▪ models with metered
breakers also support
breaker-level peak
current
▪
671