Chapter 7: Using the Web Interface
194
•
Indicate which one is the 'preferred' inlet by showing
either inlet's section
For detailed information, see
The same information is also available on the Dashboard page. See
- Transfer Switch
(on page 182) and
To perform manual power transfer or retransfer:
Performing manual transfer remotely requires either of these permissions:
"Switch Transfer Switch" or "Administrator Privileges."
1.
Click
identical to the front panel Manual Transfer button.
▪
In the standby state, when the preferred inlet restores to normal, this
button is changed to
2.
Click Transfer on the confirmation message.
▪
If there is presence of any alarm for this power transfer, such as inlet
phase sync alarm, a warning message appears. Click Force Transfer if
you decide to continue with the operation.
Transfer Switch and Inlet Status
Dashboard - Inlet 1/2
. This button is functionally
.
on
(on page 200).
Dashboard
(on page 183).