Asset Management Strips And Dctrack - LEGRAND Raritan PX3TS User Manual

Asset Management Strips and dcTrack

If any asset strips are connected to the PX3TS, the PX3TS can transmit their
information to Sunbird's dcTrack. All you have to do is to add the PX3TS to
dcTrack, and also add each IT item where an asset tag is attached to dcTrack.
Note: For instructions on connecting asset strips, see
Management Strips (on page 62).
If SNMP is enabled, event information can be transmitted to dcTrack.
Specifically, Sunbird's Power IQ detects when an asset tag is connected or
disconnected from an asset strip. Power IQ then generates a connection or
disconnection event. When dcTrack polls Power IQ, the
connection/disconnection events are pulled into dcTrack, and displayed in the
dcTrack Web Client.
To poll and display asset management events in dcTrack
•
The PX3TS that the asset strip is connected to must exist in dcTrack.
•
Each IT item connected to the asset strip via an asset tag must exist in
dcTrack.
You do not need to manually enter the asset tag IDs for IT items that
already exist in dcTrack as long as these items are in the Installed status.
Simply, plug the item's asset tag into an asset strip that is connected to the
PX3TS that exists in dcTrack. dcTrack automatically assigns the asset tag ID
to the existing IT item.
Note: If needed, the asset tag number can be overwritten.
For more information on dcTrack as well as how asset strips work with dcTrack,
contact Sunbird Professional Services and Support from the
http://support.sunbirddcim.com.
Appendix K: Integration
Connecting Asset
879