Table of Contents
Advertisement
4.
Open a CA certificate using a text editor. You should see certificate
contents similar to the following.
5.
Select and copy the contents as illustrated below, including the starting
line containing "BEGIN CERTIFICATE" and the ending line containing "END
CERTIFICATE."
6.
Paste the contents in the terminal.
7.
Press Enter.
8.
Verify whether the system shows the following command prompt,
indicating the provided CA certificate is valid.
config:#
Setting the BSSID
This command specifies the BSSID.
config:#
network wireless BSSID <bssid>
Variables:
•
<bssid> is either the MAC address of the wireless access point or none for
automatic selection.
Chapter 9: Using the Command Line Interface
593
Advertisement
Table of Contents
Troubleshooting
