Combining Regular Asset Strips - LEGRAND Raritan PX3TS User Manual

Combining Regular Asset Strips

Each tag port on the regular asset strips corresponds to a rack unit and can be
used to locate IT devices in a specific rack (or cabinet).
For each rack, you can attach asset strips up to 64U long, consisting of one
MASTER and multiple SLAVE asset strips.
The difference between the master and slave asset strips is that the master
asset strip has an RJ-45 connector while the slave does not.
The following diagram illustrates some asset strips. Note that Raritan provides
more types of asset strips than the diagram.
8U MASTER asset strip with 8 tag ports
8U SLAVE asset strip with 8 tag ports
5U "ending" SLAVE asset strip with 5 tag ports
Note: Unlike general slave asset strips, which have one DIN connector
respectively on either end, the ending slave asset strip has one DIN connector
on only one end. An ending asset strip is installed at the end of the asset strip
assembly.
To assemble asset strips:
1. Connect a MASTER asset strip to an 8U SLAVE asset strip.
▪
Plug the white male DIN connector of the slave strip into the white
female DIN connector of the master strip.
Chapter 4: Connecting External Equipment (Optional)
63