Mixing Diverse Sensor Types - LEGRAND Raritan PX3TS User Manual

DPX3-ENVHUB4 sensor hub
Any Raritan sensor packages

Mixing Diverse Sensor Types

You can mix diverse sensor packages on one PX3TS according to the following
sensor combination principles. In some scenarios, the DPX3-ENVHUB4 sensor
hub is required.
When mixing different sensor types, remember that the PX3TS only supports a
maximum of 32 sensors/actuators.
PX3TS does NOT support any other sensor-mixing combinations than those
described in this section.
In most illustrations below, any DX or DPX3 sensor package can be replaced
with a DX2 sensor package.
For those illustrations where DX, DPX3 and DX2 are interchangeable, they are
all marked with the following oval image.
Important: Unlike DX or DPX3 series, DX2 CANNOT be connected with DPX
sensor package(s).
1 DX + 1 DPX:
•
It is strongly recommended to use an RJ-12 to RJ-45 adapter to connect the
DPX sensor package to the DX sensor package.
Chapter 4: Connecting External Equipment (Optional)
57