LEGRAND Raritan PX3TS User Manual page 673

config:# authentication ldap add <host> <port> <ldap_type> <security>
<bind_type> <base_DN> <login_name_att> <user_entry_class> "Optional
Parameters"
Note: "Optional Parameters" refer to one or multiple parameters listed in the
section Optional Parameters
server settings need to specify these parameters. For example, if setting the
<bind_type> to "authenticatedBind", then you must add the parameter
"bindDN" to this command.
When the above command is successfully performed, a list of all LDAP servers,
including the newly-added one, will be displayed, which is similar to the
following diagram.
Tip: To verify all settings of a newly-added server, see
(on page 550).
Variables:
•
<host> is the IP address or host name of the LDAP server.
•
<port> is the port number assigned for communication with the LDAP
server.
•
<ldap_type> is one of the LDAP server types: openldap or activeDirectory.
Type
openldap
activeDirectory
•
<security> is one of the security options: none, startTls or tls.
Type
none
startTls
tls
Chapter 9: Using the Command Line Interface
(on page 654). They are required only when your
Authentication Settings
Description
OpenLDAP server
Microsoft Active Directory
Description
No security
StartTLS
TLS
653