LEGRAND Raritan PX3TS User Manual page 270

Chapter 7: Using the Web Interface
250
Status
normal
above upper warning
above upper critical
Note: The "below lower warning" and "below lower critical" states also
show yellow and red colors respectively. However, it is not meaningful to
enable the two thresholds for current levels.
•
Protected outlets, which are indicated with outlet numbers
•
Associated lines
To configure current thresholds for multiple overcurrent protectors:
OCP thresholds, when enabled, help you identify the OCP whose RMS current
enters the warning or critical level with the yellow or red color. In addition, you
can have PX3TS automatically generate alert notifications for any warning or
critical status. See Event Rules and Actions
Note: By default, upper thresholds of an OCP's RMS current have been
configured. See Default Voltage and Current Thresholds
can modify them as needed.
1. Click > Threshold Bulk Setup.
2. Select one or multiple OCPs.
▪
To select all OCPs, simply click the topmost checkbox in the header
row.
3. Click Edit Thresholds.
4. Make changes as needed.
▪
To enable any threshold, select the corresponding checkbox.
Bar colors
(on page 375).
(on page 842). You