Asset Strip - LEGRAND Raritan PX3TS User Manual

Asset Strip

After connecting and detecting Raritan asset management strips (asset strips),
the PX3TS shows 'Asset Strip' in place of 'Feature Port' in the menu.
Note: For connection instructions, see
(on page 62).
To open the Asset Strip page, click it in the
you can configure the rack units of asset strips and asset tags. A rack unit refers
to a tag port on the asset strips. The "Change Asset Strip Configuration"
permission is required.
For the functionality of this icon
(on page 279).
To configure asset strip and rack unit settings:
1. Click Edit Settings.
2. Make changes to the settings by directly typing a new value, or clicking
that field to select a different option.
Field
Name
Number of rack
units
Connecting Asset Management Strips
Menu (on page 176). On this page,
on the top-right corner, see
Description
Name for this asset strip assembly.
Total of available tag ports on this asset strip
assembly, ranging between 8 and 64.
▪ For the current generation of asset strips, which
show the suffix "G3" on its hardware label, the
PX3TS automatically detects the number of its
tag ports (rack units), and you cannot change
this value.
▪ For old "non-G3" asset strips, there is no
automatic detection for them so you must
manually adjust this value.
Chapter 7: Using the Web Interface
Feature Port
281