LEGRAND Raritan PX3TS User Manual page 523

Storage location
Local
CIFS/Samba
FTP
To find where the snapshots are saved on CIFS/Samba or FTP, see
Identifying Snapshots Folders on Remote Servers
3. Click Save.
Warning: Before disconnecting or powering off any remote server where the
webcam snapshots are being stored, you must first change the storage
settings, or the connectivity issue of the remote server may degrade the
performance of the PX3TS web interface. If this issue occurs, first restore the
connectivity of the remote server and then change the storage settings of the
webcam snapshots.
Description
'Local' means the PX3TS. This is the default.
▪ It can store a maximum of 10 snapshots only.
▪ The web interface can list and display all snapshots
stored on the PX3TS. See
Locally-Saved Snapshots
▪ All snapshots are CLEARED when the PX3TS is
rebooted.
Snapshots are saved onto a Common Internet File
System/Samba.
▪ Total number of saved snapshots depends on the
server's capacity.
▪ All saved snapshots remain available after rebooting
the PX3TS.
▪ Configure the following fields:
* Server - the desired CIFS/Samba server
* Share/folder - this is the share drive/folder
* Username - for server access
* Password - for server access
Snapshots are saved onto a FTP server.
▪ Total number of saved snapshots depends on the
server's capacity.
▪ All saved snapshots remain available after rebooting
the PX3TS.
▪ Configure the following fields:
* Server URL - the FTP server's path
* Username - for server access
* Password - for server access
Chapter 7: Using the Web Interface
Viewing and Managing
(on page 500).
(on page 504).
503