LEGRAND Raritan PX3TS User Manual page 842

Appendix I: RADIUS Configuration Illustration
822
Note: If your PX3TS uses PAP, then select "PAP."
10. Select Vendor Specific to the left of the dialog, and click Add. The Add
Vendor Specific Attribute dialog appears.
11. Select Custom in the Vendor field, and click Add. The Attribute Information
dialog appears.
12. Click Add, and the Vendor-Specific Attribute Information dialog appears.
13. Click "Enter Vendor Code" and type 13742.
14. Select "Yes, it conforms" to indicate that the custom attribute conforms to
the RADIUS Request For Comment (RFC).
15. Click Configure Attribute, and then:
a. Type 26 in the "Vendor-assigned attribute number" field.
b. Select String in the "Attribute format" field.
c. Type Raritan:G{Admin User SystemTester} in the "Attribute value" field.
In this example, three roles 'Admin,' 'User' and 'SystemTester' are
specified inside the curved brackets {}.