LEGRAND Raritan PX3TS User Manual page 483

To set the Cisco EnergyWise configuration:
1. Select the Enable EnergyWise checkbox.
2. Configure the following:
Field
Domain name
Domain password
Port
Polling interval
3. Click Save in the EnergyWise section.
For Raritan's PDU models of 3000, 4000, and 5000 series, the parent/child
relationship is formed after the Cisco EnergyWise feature is enabled.
•
The PDU becomes a parent domain member.
•
All outlets become children of the PDU.
To disable the access to USB-A port(s):
1. Deselect the Enable USB Host Ports checkbox.
2. Click Save in the USB Host Ports section.
Tip: After the Enable USB Host Ports checkbox is deselected, only the access to
USB-A port(s) is prevented while the USB-B port works as normal. That is, users
still can access the USB-B port, such as accessing CLI via USB-B. To disable the
access to the USB-B port, you have to apply a mechanical method.
Chapter 7: Using the Web Interface
Description
Type the name of a Cisco EnergyWise domain where the
PX3TS belongs
▪ Up to 127 printable ASCII characters are permitted.
▪ Spaces and asterisks are NOT acceptable.
Type the authentication password (secret) for entering the
Cisco EnergyWise domain
▪ Up to 127 printable ASCII characters are permitted.
▪ Spaces and asterisks are NOT acceptable.
Type a User Datagram Protocol (UDP) port number for
communications in the Cisco EnergyWise domain.
▪ Range from 1 to 65535.
▪ Default is 43440.
Type a polling interval to determine how often the PX3TS is
queried in the Cisco EnergyWise domain.
▪ Range from 30 to 600 ms.
▪ Default is 180 ms.
463