LEGRAND Raritan PX3TS User Manual page 530

Chapter 7: Using the Web Interface
510
Section Description
▪ Specify how long the door handle lock can remain
Timeout
Choose the correct setting based on the type of contact
Door sensor
closure sensors used to monitor the door:
polarity
▪ Normally closed: The contact is closed (conducting)
▪ Normally open: The contact not conducting when the
▪ Note: For both normally closed and normally open
4. Click Save.
open after someone opens the door handle via a smart
card or via remote control using the software. When
the timeout expires, the door handle lock will be
automatically closed. Default is 600 seconds (that is, 10
minutes).
when the door is closed and open (not conducting)
when the door is open. This is the default.
door is closed and conducting when the door is open.
sensors, the reported state is "alarmed" when the door
is open and "normal" when the door is closed.