Appendix D: Bulk Configuration or Firmware Upgrade via DHCP/TFTP
DHCP IPv6 Configuration in Windows
758
Important: The magic cookie is transmitted to and stored in PX3TS at the
time of executing the "fwupdate.cfg" commands. The DHCP/TFTP
operation is triggered only when there is a mismatch between the magic
cookie in DHCP and the one stored in PX3TS. Therefore, you must modify
the magic cookie's value in DHCP when intending to execute the
"fwupdate.cfg" commands next time.
For those PX3TS devices using IPv6 addresses, follow this procedure to
configure your DHCP server. The following illustration is based on Microsoft
Windows Server 2012 system.
Required Windows IPv6 settings in DHCP:
1.
Add a new vendor class for Raritan's PX3TS under IPv6.
®