LEGRAND Raritan PX3TS User Manual page 201

Number Section
Transfer Switch
Inlet 1/2
Alerted Sensors
Alarms
Inlet History
Overcurrent
Protectors
Information shown
Status of the inlet transfer switch.
See Dashboard - Transfer Switch
Overview of both inlets' power data.
See Dashboard - Inlet 1/2
▪ When no sensors enter the alarmed state, this section shows the
message "No Alerted Sensors."
▪ When any sensor enters the alarmed state, this section lists all of
them.
See Dashboard - Alerted Sensors
This section can show data only after you have set event rules
requiring users to take the acknowledgment action.
▪ When there are no unacknowledged events, this section shows the
message "No Alarms."
▪ When there are unacknowledged events, this section lists all of them.
See Dashboard - Alarms
The chart of the inlet's active power history is displayed by default. You
can make it show a different data type.
See Dashboard - Inlet History
This section is available only when your PX3TS contains overcurrent
protectors (OCPs).
▪ Overview of each OCP's status
▪ A current bar per OCP, which changes colors to indicate the RMS
current state
- green: normal
- yellow: warning
- red: critical
See Dashboard - OCP (on page 192).
Note that the Overcurrent Protectors section shows information of the
circuit breakers for protecting outlets, NOT the fuses for protecting the
inlet transfer switch.
Chapter 7: Using the Web Interface
(on page 182).
(on page 183).
(on page 185).
(on page 190).
(on page 187).
181