LEGRAND Raritan PX3TS User Manual page 629

config:# security ipAccessControl ipv4 defaultPolicyIn <policy>
config:# security ipAccessControl ipv4 defaultPolicyOut <policy>
config:# security ipAccessControl ipv6 enabled <option>
config:# security ipAccessControl ipv6 defaultPolicyIn <policy>
config:# security ipAccessControl ipv6 defaultPolicyOut <policy>
Determine the default IPv4 firewall control policy for outbound traffic:
•
IPv6 commands
Enable or disable the IPv6 firewall control feature:
Determine the default IPv6 firewall control policy for inbound traffic:
Determine the default IPv6 firewall control policy for outbound traffic:
Variables:
•
<option> is one of the options: true or false.
Option Description
true Enables the IP access control feature.
false Disables the IP access control feature.
•
<policy> is one of the options: accept, drop or reject.
Option Description
accept Accepts traffic from all IP addresses.
drop Discards traffic from all IP addresses, without sending
any failure notification to the source host.
reject Discards traffic from all IP addresses, and an ICMP
message is sent to the source host for failure
notification.
Chapter 9: Using the Command Line Interface
609