LEGRAND Raritan PX3TS User Manual page 387

Note: Whenever PX3TS is successfully connected to one external
authentication server, it STOPS trying access to remaining servers in the
authentication list regardless of the user authentication result.
To enable both external and local authentication:
1. In the 'Authentication type' field, select the external authentication you
want -- LDAP or RADIUS.
2. Select the following checkbox. Then the PX3TS always tries external
authentication first. Whenever the external authentication fails, the PX3TS
switches to local authentication.
3. Click Save.
To disable external authentication:
1. In the 'Authentication type' field, select Local.
2. Click Save.
Configuring Login Settings
Choose Device Settings > Security > Login Settings to open the Login Settings
page, where you can:
•
Configure the user blocking feature.
Note: The user blocking function applies only to local authentication
instead of external authentication through AA servers.
•
Determine the timeout period for any inactive user.
•
Prevent simultaneous logins using the same login name.
To configure user blocking:
1. To enable the user blocking feature, select the 'Block user on login failure'
checkbox.
2. In the 'Block timeout' field, type a value or click
option. This setting determines how long the user is blocked.
▪
If you type a value, the value must be followed by a time unit, such as
'4 min.' See Time Units
3. In the 'Maximum number of failed logins' field, type a number. This is the
maximum number of login failure the user is permitted before the user is
blocked from accessing the PX3TS.
4. Click Save.
Chapter 7: Using the Web Interface
(on page 214).
to select a time
367