Extended Cascading With Px3Ts Devices - LEGRAND Raritan PX3TS User Manual

Chapter 3: Initial Installation and Configuration

Extended Cascading with PX3TS Devices

PX3TS supports cascading via either Ethernet or USB ports. This is because they
have "two" Ethernet ports.
You can use either Ethernet port on the PX3TS PDU for cascading.
You must set the cascading mode before establishing the chain. See Setting the
Cascading Mode (on page 328).
Both cascading modes support a maximum of 16 devices in a chain.
When establishing a Port-Forwarding chain, make sure you follow the
guidelines described in the section titled Restrictions of Port-Forwarding
Connections (on page 34).
You can mix Ethernet and USB cascading in the PX3TS PDU chain if preferred.
The following diagram illustrates such a chain.
The distance between two Ethernet-cascaded devices can be up to 100 meters,
while the distance between two USB-cascaded devices supports up to 5 meters
only.
31