LEGRAND Raritan PX3TS User Manual page 283

2. Click the desired sensor type (required), and then click Edit Thresholds.
3. Make changes as needed.
▪
To enable any threshold, select the corresponding checkbox.
▪
Type a new value in the accompanying text box.
For concepts of thresholds, deassertion hysteresis and assertion timeout,
see Sensor Threshold Settings
4. Click Save.
Tip: To customize the threshold settings on a per-sensor basis, go to
Sensor/Actuator Pages (on page 273).
To turn on or off any actuator(s):
1. Select one or multiple actuators which are in the same status - on or off.
2. To select multiple actuators, click
then select desired actuators.
3. Click the desired button.
Chapter 7: Using the Web Interface
(on page 834).
to make checkboxes appear and
Individual
263