LEGRAND Raritan PX3TS User Manual page 712

Chapter 9: Using the Command Line Interface
692
Setting an LED Color for a Rack Unit
This command syntax sets the LED color for a specific rack unit on the specified
asset strip. You need to set a rack unit's LED color only when the LED operation
mode of this rack unit has been set to "manual."
config:# rackUnit <n> <rack_unit> LEDColor <color>
Variables:
•
<n> is the number of the FEATURE port where the selected asset strip is
physically connected. For the PX3TS device with only one FEATURE port,
the number is always 1.
•
<rack_unit> is the index number of the desired rack unit. The index
number is available on the asset strip or the Asset Strip page of the web
interface.
•
<color> is the hexadecimal RGB value of a color in HTML format. The
<color> variable ranges from #000000 to #FFFFFF.
Note: A rack unit's LED color setting overrides the global LED color setting on it.
See Setting LED Colors for Connected Tags
Colors for Disconnected Tags
Setting an LED Mode for a Rack Unit
This command syntax sets the LED mode for a specific rack unit on the specified
asset strip. You need to set a rack unit's LED mode only when the LED
operation mode of this rack unit has been set to "manual."
config:# rackUnit <n> <rack_unit> LEDMode <mode>
Variables:
•
<n> is the number of the FEATURE port where the selected asset strip is
physically connected. For the PX3TS device with only one FEATURE port,
the number is always 1.
•
<rack_unit> is the index number of the desired rack unit. The index
number is available on the asset strip or the Asset Strip page of the web
interface.
•
<mode> is one of the LED modes: on, off, blinkSlow or blinkFast.
Mode Description
on This mode has the LED stay lit permanently.
off This mode has the LED stay off permanently.
(on page 689) and
(on page 690).
Setting LED