LEGRAND Raritan PX3TS User Manual page 156

Chapter 6: Using the PX3TS
136
3. Press the FUNC button to perform the outlet switching operation. The LCD
display cycles between two messages as shown in the two diagrams below.
In the following diagrams, X represents the selected outlet's number.
To cancel the outlet switching operation, press the FUNC button again.
4. To turn on the outlet, press the Up button. The "on?" confirmation
message displays.
To turn off the outlet, press the Down button. The "oF?" confirmation
message displays.
5. Press the same button as step 4 again to confirm the operation.
Note: If you press a different button in this step, for example, pressed the
Down button in step 4 but the Up button in step 5, the outlet switching
operation is not confirmed and the LCD display will return to the messages
in step 3.
6. The outlet switching operation is confirmed now and the LCD display
indicates the latest power state of the selected outlet.
▪
on: The outlet has been turned on.
▪
oFF: The outlet has been turned off.
7. You can verify the power state of the selected outlet by checking its LED
color. Green indicates the power off state and red indicates the power on
state.