Master Units Manage Link Units - LEGRAND Raritan PX3TS User Manual

About the Link ID
The PDU ID "1" is automated and reserved internally for the master unit. The
master unit's PDU ID "1" cannot be edited.
The Link ID "2-8" is available for you to select as the ID for each of the link units
you add to chain. From the Link ID drop-down, you can select the desired Link
ID to manage the link units in the chain. Once selected, the Link ID cannot be
edited.

Master Units Manage Link Units

The master unit manages the following functions for the entire chain of linked
units:
•
User management and authentication – configured only on the master.
•
Date and time – the master synchronizes its date and time settings to link
units. If NTP is not used, then the synchronization interval is every 10
minutes.
•
Device settings – only the master device settings are configurable, except
for Network Settings. Some settings will be synced to link units. The serial
port is configurable for the master only; link units use the console.
•
Data model settings – such as outlet names, thresholds, peripherals, etc.,
are configured on the master and stored on link units.
•
Lua scripts – Communication with link units in a Lua script is possible.
Chapter 5: PDU Linking
83